WITH RIGID HUB ON ONE END
Especificações EZ2 S
| EZ2 S Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Clamping fit length C1/C2 (mm) | C1/C2 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 S Serien | 10 | |
| Type | A | B | |
| Rated torque (Nm) | TKN | 12,5 | 16 |
| Overall length (mm) | H | 34 |
| Clamping fit length C1/C2 (mm) | C1/C2 | 20 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 5 - 16 |
| Outside diameter with screw head (mm) | BS | 32 |
| Outside diameter hub (mm) | B1 | 32 |
| Outside diameter tube section (mm) | B2 | 28 |
| Fastening screw (ISO 4762) | E | 4 x M4 |
| Tightening torque of the fastening screw (Nm) | E | 4 |
| Distance between centerlines (mm) | F | 10,5 |
| Distance (mm) | G/G1 | 7,5 |
| Maximum torque* (Nm) | TKmax | 25 | 32 |
| Length (mm) | O | 16,6 |
| Overall length (mm) | A | 85 - 4.000 |
| Shaft average value (mm) | N | 26 |
| 10 | ||
| CAD | Por favor clique aqui e perguntar diretamente! |
| EZ2 S Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Clamping fit length C1/C2 (mm) | C1/C2 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 S Serien | 20 | |
| Type | A | B | |
| Rated torque (Nm) | TKN | 17 | 21 |
| Overall length (mm) | H | 46 |
| Clamping fit length C1/C2 (mm) | C1/C2 | 25 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 8 - 25 |
| Outside diameter with screw head (mm) | BS | 44,5 |
| Outside diameter hub (mm) | B1 | 42 |
| Outside diameter tube section (mm) | B2 | 35 |
| Fastening screw (ISO 4762) | E | 4 x M5 |
| Tightening torque of the fastening screw (Nm) | E | 8 |
| Distance between centerlines (mm) | F | 15,5 / 15 |
| Distance (mm) | G/G1 | 8,5 |
| Maximum torque* (Nm) | TKmax | 34 | 42 |
| Length (mm) | O | 18,6 |
| Overall length (mm) | A | 115 - 4.000 |
| Shaft average value (mm) | N | 33 |
| 20 | ||
| CAD | Por favor clique aqui e perguntar diretamente! |
| EZ2 S Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Clamping fit length C1/C2 (mm) | C1/C2 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 S Serien | 60 | |
| Type | A | B | |
| Rated torque (Nm) | TKN | 60 | 75 |
| Overall length (mm) | H | 63 |
| Clamping fit length C1/C2 (mm) | C1/C2 | 40 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 14 - 32 |
| Outside diameter with screw head (mm) | BS | 57 |
| Outside diameter hub (mm) | B1 | 56 |
| Outside diameter tube section (mm) | B2 | 50 |
| Fastening screw (ISO 4762) | E | 4 x M6 |
| Tightening torque of the fastening screw (Nm) | E | 15 |
| Distance between centerlines (mm) | F | 21 |
| Distance (mm) | G/G1 | 15 |
| Maximum torque* (Nm) | TKmax | 120 | 150 |
| Length (mm) | O | 32 |
| Overall length (mm) | A | 155 - 4.000 |
| Shaft average value (mm) | N | 49 |
| 60 | ||
| CAD | Por favor clique aqui e perguntar diretamente! |
| EZ2 S Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Clamping fit length C1/C2 (mm) | C1/C2 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 S Serien | 150 | |
| Type | A | B | |
| Rated torque (Nm) | TKN | 160 | 200 |
| Overall length (mm) | H | 73 |
| Clamping fit length C1/C2 (mm) | C1/C2 | 47 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 19 - 36 |
| Outside diameter with screw head (mm) | BS | 68 |
| Outside diameter hub (mm) | B1 | 66,5 |
| Outside diameter tube section (mm) | B2 | 60 |
| Fastening screw (ISO 4762) | E | 4 x M8 |
| Tightening torque of the fastening screw (Nm) | E | 35 |
| Distance between centerlines (mm) | F | 24 |
| Distance (mm) | G/G1 | 17,5 |
| Maximum torque* (Nm) | TKmax | 320 | 400 |
| Length (mm) | O | 37 |
| Overall length (mm) | A | 175 - 4.000 |
| Shaft average value (mm) | N | 57 |
| 150 | ||
| CAD | Por favor clique aqui e perguntar diretamente! |
| EZ2 S Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Clamping fit length C1/C2 (mm) | C1/C2 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 S Serien | 300 | |
| Type | A | B | |
| Rated torque (Nm) | TKN | 325 | 405 |
| Overall length (mm) | H | 84 |
| Clamping fit length C1/C2 (mm) | C1/C2 | 55 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 19 - 45 |
| Outside diameter with screw head (mm) | BS | 85 |
| Outside diameter hub (mm) | B1 | 82 |
| Outside diameter tube section (mm) | B2 | 76 |
| Fastening screw (ISO 4762) | E | 4 x M10 |
| Tightening torque of the fastening screw (Nm) | E | 70 |
| Distance between centerlines (mm) | F | 29 |
| Distance (mm) | G/G1 | 20 |
| Maximum torque* (Nm) | TKmax | 650 | 810 |
| Length (mm) | O | 42 |
| Overall length (mm) | A | 220 - 4.000 |
| Shaft average value (mm) | N | 67 |
| 300 | ||
| CAD | Por favor clique aqui e perguntar diretamente! |
| EZ2 S Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Clamping fit length C1/C2 (mm) | C1/C2 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque* (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 S Serien | 450 | |
| Type | A | B | |
| Rated torque (Nm) | TKN | 530 | 660 |
| Overall length (mm) | H | 97 |
| Clamping fit length C1/C2 (mm) | C1/C2 | 65 |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 24 - 60 |
| Outside diameter with screw head (mm) | BS | 105 |
| Outside diameter hub (mm) | B1 | 102 |
| Outside diameter tube section (mm) | B2 | 90 |
| Fastening screw (ISO 4762) | E | 4 x M12 |
| Tightening torque of the fastening screw (Nm) | E | 120 |
| Distance between centerlines (mm) | F | 38 |
| Distance (mm) | G/G1 | 25 |
| Maximum torque* (Nm) | TKmax | 1060 | 1350 |
| Length (mm) | O | 52 |
| Overall length (mm) | A | 250 - 4.000 |
| Shaft average value (mm) | N | 78 |
| 450 | ||
| CAD | Por favor clique aqui e perguntar diretamente! |
Propriedade
FEATURES
- Easy lateral installation without the need to disturb adjacent shafts
- Standard lengths up to 4m
- For use with intermediate support bearing (ZL)
- Hubs: high strength aluminum
- Intermediate tube: high strength aluminum
- Elastomer Insert: Wear resistant, thermally stable TPU
- Two split clamping hubs, with two clamping screws in each, and concave driving jaws on one end, with rigid hub on the other. Backlash free, vibration damping, electrically isolating elastomer insert press fit into the jaw hub. Precision intermediate tube with a high level of straightness and lateral stiffness.
Acessórios
ZL INTERMEDIATE SUPPORT BEARING
The Intermediate Support Bearing (ZL) in combination with the line shafts of the series ZA and ES for special installation situations.
| Size (mm) | 15 | 20 | 30 | 40 | 50 | |
|---|---|---|---|---|---|---|
| Length (mm) | A | 127 | 127 | 163 | 178 | 206 |
| Heigh(mm) | B | 62 | 65 | 82 | 97 | 113 |
| Width (mm) | C | 38 | 38 | 46 | 52 | 60 |
| Mounting dimension (mm) | D1 | 19 | 19 | 21 | 21 | 23 |
| Mounting dimension (mm) | D2 | 13 | 13 | 17 | 17 | 20 |
| Mounting dimension (mm) | E | 14 | 14 | 17 | 18 | 21 |
| Hole spacing (mm) | F | 95 | 95 | 121 | 136 | 159 |
| Distance (mm) | G1 | 12,7 | 12,7 | 15,9 | 19 | 19 |
| Distance (mm) | G2 | 31 | 31 | 38,1 | 49,2 | 51,6 |
| Distance (mm) | H | 30,2 | 33,3 | 42,9 | 49,2 | 57,2 |
| Intermediate Support Bearing (UCP) | 202 | 204 | 206 | 208 | 210 |
ZW intermediate shaft
Intermediate shaft (ZW) for Intermediate Support Bearing (ZL) in conjuction with ZA and EZ Line Shafts. Steel construction.
The intermediate shaft ZW1 comes without keyways, the intermediate shaft ZW 2 has one keyway and the intermediate shaft ZW 3 has two keyways.
Keyways are machined to DIN 6885 standard.
| Size (ShaftØ) | D | 15 | 20 | 30 | 40 | 50 |
|---|---|---|---|---|---|---|
| Length (mm) | L | 130 | 140 | 165 | 195 | 210 |
| Intermediate Support Bearing (UCP) | 202 | 204 | 206 | 208 | 210 |
Lista