BZ1 CROWNED GEAR COUPLINGS
Especificações BZ1
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 25 | ||
Rated torque (kNm) | TKN | 2,9 | |
Fit length (mm) | C | 50 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 62/62 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 18-62 | |
Outside diameter (mm) | B1 | 142 | |
Moment of inertia at D max (10-3kgm2) | 11,6 | ||
Weight at D max (kg) | 4,8 | ||
Tightening torque of the fastening screw (Nm) | H | 36 | |
Hub length (mm) | F | 46 | |
Maximum torque (Nm) | TKmax | 6,8 | |
Speed max. (rpm) | 4550 | ||
Outside diameter of hub (mm) | B3 | 86 | |
Flange outside diameter (mm) | B2 | 104,6 | |
Bolt circle diameter (mm) | G | 73 | |
Thread | G | M6 | |
Overall length (mm) | A | 103 | |
Distance between shaft ends | DBSE | 3 | |
Screw (mm) | H | M10 | |
Axial misalignment (mm) | S | 1,5 | |
Angular misalignment (Degree) | 2x0,35 | ||
25 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 50 | ||
Rated torque (kNm) | TKN | 5,7 | |
Fit length (mm) | C | 62 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 72/78 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 30-78 | |
Outside diameter (mm) | B1 | 168 | |
Moment of inertia at D max (10-3kgm2) | 28,7 | ||
Weight at D max (kg) | 8,4 | ||
Tightening torque of the fastening screw (Nm) | H | 36 | |
Hub length (mm) | F | 59 | |
Maximum torque (Nm) | TKmax | 14 | |
Speed max. (rpm) | 4000 | ||
Outside diameter of hub (mm) | B3 | 105 | |
Flange outside diameter (mm) | B2 | 130,5 | |
Bolt circle diameter (mm) | G | 91 | |
Thread | G | M8 | |
Overall length (mm) | A | 127 | |
Distance between shaft ends | DBSE | 3 | |
Screw (mm) | H | M10 | |
Axial misalignment (mm) | S | 1,5 | |
Angular misalignment (Degree) | 2x0,35 | ||
50 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 100 | ||
Rated torque (kNm) | TKN | 9 | |
Fit length (mm) | C | 76 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 90/98 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 32-98 | |
Outside diameter (mm) | B1 | 200 | |
Moment of inertia at D max (10-3kgm2) | 70,6 | ||
Weight at D max (kg) | 14,2 | ||
Tightening torque of the fastening screw (Nm) | H | 65 | |
Hub length (mm) | F | 78,5 | |
Maximum torque (Nm) | TKmax | 21,5 | |
Speed max. (rpm) | 3900 | ||
Outside diameter of hub (mm) | B3 | 132 | |
Flange outside diameter (mm) | B2 | 158,4 | |
Bolt circle diameter (mm) | G | 115 | |
Thread | G | M10 | |
Overall length (mm) | A | 157 | |
Distance between shaft ends | DBSE | 5 | |
Screw (mm) | H | M12 | |
Axial misalignment (mm) | S | 2,5 | |
Angular misalignment (Degree) | 2x0,35 | ||
100 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 150 | ||
Rated torque (kNm) | TKN | 14,5 | |
Fit length (mm) | C | 90 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 105/112 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 42-112 | |
Outside diameter (mm) | B1 | 225 | |
Moment of inertia at D max (10-3kgm2) | 135,3 | ||
Weight at D max (kg) | 21,4 | ||
Tightening torque of the fastening screw (Nm) | H | 65 | |
Hub length (mm) | F | 92,5 | |
Maximum torque (Nm) | TKmax | 35 | |
Speed max. (rpm) | 3700 | ||
Outside diameter of hub (mm) | B3 | 151 | |
Flange outside diameter (mm) | B2 | 183,4 | |
Bolt circle diameter (mm) | G | 132 | |
Thread | G | M12 | |
Overall length (mm) | A | 185 | |
Distance between shaft ends | DBSE | 5 | |
Screw (mm) | H | M12 | |
Axial misalignment (mm) | S | 2,5 | |
Angular misalignment (Degree) | 2x0,35 | ||
150 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 200 | ||
Rated torque (kNm) | TKN | 22 | |
Fit length (mm) | C | 105 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 122/132 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 45-132 | |
Outside diameter (mm) | B1 | 265 | |
Moment of inertia at D max (10-3kgm2) | 326,7 | ||
Weight at D max (kg) | 36 | ||
Tightening torque of the fastening screw (Nm) | H | 150 | |
Hub length (mm) | F | 108 | |
Maximum torque (Nm) | TKmax | 54 | |
Speed max. (rpm) | 3550 | ||
Outside diameter of hub (mm) | B3 | 179 | |
Flange outside diameter (mm) | B2 | 211,5 | |
Bolt circle diameter (mm) | G | 154 | |
Thread | G | M12 | |
Overall length (mm) | A | 216 | |
Distance between shaft ends | DBSE | 6 | |
Screw (mm) | H | M16 | |
Axial misalignment (mm) | S | 3 | |
Angular misalignment (Degree) | 2x0,35 | ||
200 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 300 | ||
Rated torque (kNm) | TKN | 34 | |
Fit length (mm) | C | 120 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 144/156 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 50-156 | |
Outside diameter (mm) | B1 | 300 | |
Moment of inertia at D max (10-3kgm2) | 605,6 | ||
Weight at D max (kg) | 51,5 | ||
Tightening torque of the fastening screw (Nm) | H | 150 | |
Hub length (mm) | F | 123 | |
Maximum torque (Nm) | TKmax | 83 | |
Speed max. (rpm) | 3000 | ||
Outside diameter of hub (mm) | B3 | 209,5 | |
Flange outside diameter (mm) | B2 | 245,5 | |
Bolt circle diameter (mm) | G | 180 | |
Thread | G | M16 | |
Overall length (mm) | A | 246 | |
Distance between shaft ends | DBSE | 8 | |
Screw (mm) | H | M16 | |
Axial misalignment (mm) | S | 4 | |
Angular misalignment (Degree) | 2x0,35 | ||
300 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 450 | ||
Rated torque (kNm) | TKN | 45 | |
Fit length (mm) | C | 135 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 160/174 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 60-174 | |
Outside diameter (mm) | B1 | 330 | |
Moment of inertia at D max (10-3kgm2) | 1021 | ||
Weight at D max (kg) | 71 | ||
Tightening torque of the fastening screw (Nm) | H | 150 | |
Hub length (mm) | F | 139 | |
Maximum torque (Nm) | TKmax | 110 | |
Speed max. (rpm) | 2750 | ||
Outside diameter of hub (mm) | B3 | 234 | |
Flange outside diameter (mm) | B2 | 275,5 | |
Bolt circle diameter (mm) | G | 204 | |
Thread | G | M16 | |
Overall length (mm) | A | 278 | |
Distance between shaft ends | DBSE | 8 | |
Screw (mm) | H | M16 | |
Axial misalignment (mm) | S | 4 | |
Angular misalignment (Degree) | 2x0,35 | ||
450 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 600 | ||
Rated torque (kNm) | TKN | 70 | |
Fit length (mm) | C | 150 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 175/190 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 70-190 | |
Outside diameter (mm) | B1 | 370 | |
Moment of inertia at D max (10-3kgm2) | 1745,5 | ||
Weight at D max (kg) | 99 | ||
Tightening torque of the fastening screw (Nm) | H | 220 | |
Hub length (mm) | F | 154 | |
Maximum torque (Nm) | TKmax | 170 | |
Speed max. (rpm) | 2420 | ||
Outside diameter of hub (mm) | B3 | 255 | |
Flange outside diameter (mm) | B2 | 307 | |
Bolt circle diameter (mm) | G | 220 | |
Thread | G | M20 | |
Overall length (mm) | A | 308 | |
Distance between shaft ends | DBSE | 8 | |
Screw (mm) | H | M18 | |
Axial misalignment (mm) | S | 4 | |
Angular misalignment (Degree) | 2x0,35 | ||
600 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 800 | ||
Rated torque (kNm) | TKN | 85 | |
Fit length (mm) | C | 175 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 192/210 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 90-210 | |
Outside diameter (mm) | B1 | 406 | |
Moment of inertia at D max (10-3kgm2) | 2963 | ||
Weight at D max (kg) | 144 | ||
Tightening torque of the fastening screw (Nm) | H | 400 | |
Hub length (mm) | F | 179 | |
Maximum torque (Nm) | TKmax | 205 | |
Speed max. (rpm) | 2270 | ||
Outside diameter of hub (mm) | B3 | 280 | |
Flange outside diameter (mm) | B2 | 335 | |
Bolt circle diameter (mm) | G | 240 | |
Thread | G | M20 | |
Overall length (mm) | A | 358 | |
Distance between shaft ends | DBSE | 8 | |
Screw (mm) | H | M22 | |
Axial misalignment (mm) | S | 4 | |
Angular misalignment (Degree) | 2x0,35 | ||
800 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 1500 | ||
Rated torque (kNm) | TKN | 150 | |
Fit length (mm) | C | 190 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 210/233 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 110-233 | |
Outside diameter (mm) | B1 | 438 | |
Moment of inertia at D max (10-3kgm2) | 4147,2 | ||
Weight at D max (kg) | 165 | ||
Tightening torque of the fastening screw (Nm) | H | 400 | |
Hub length (mm) | F | 194 | |
Maximum torque (Nm) | TKmax | 360 | |
Speed max. (rpm) | 1950 | ||
Outside diameter of hub (mm) | B3 | 306 | |
Flange outside diameter (mm) | B2 | 367 | |
Bolt circle diameter (mm) | G | 268 | |
Thread | G | M24 | |
Overall length (mm) | A | 388 | |
Distance between shaft ends | DBSE | 8 | |
Screw (mm) | H | M22 | |
Axial misalignment (mm) | S | 4 | |
Angular misalignment (Degree) | 2×0,35° | ||
1500 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 2000 | ||
Rated torque (kNm) | TKN | 200 | |
Fit length (mm) | C | 220 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 245/280 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 120-280 | |
Outside diameter (mm) | B1 | 505 | |
Moment of inertia at D max (10-3kgm2) | 7982 | ||
Weight at D max (kg) | 234,5 | ||
Tightening torque of the fastening screw (Nm) | H | 520 | |
Hub length (mm) | F | 225 | |
Maximum torque (Nm) | TKmax | 480 | |
Speed max. (rpm) | 1730 | ||
Outside diameter of hub (mm) | B3 | 356 | |
Flange outside diameter (mm) | B2 | 423 | |
Bolt circle diameter (mm) | G | 316 | |
Thread | G | M24 | |
Overall length (mm) | A | 450 | |
Distance between shaft ends | DBSE | 10 | |
Screw (mm) | H | M24 | |
Axial misalignment (mm) | S | 5 | |
Angular misalignment (Degree) | 2×0,35° | ||
2000 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 3000 | ||
Rated torque (kNm) | TKN | 290 | |
Fit length (mm) | C | 260 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 160-325 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 160-325 | |
Outside diameter (mm) | B1 | 590 | |
Moment of inertia at D max (10-3kgm2) | 18781 | ||
Weight at D max (kg) | 406 | ||
Tightening torque of the fastening screw (Nm) | H | 670 | |
Hub length (mm) | F | 221 | |
Maximum torque (Nm) | TKmax | 580 | |
Speed max. (rpm) | 1100 | ||
Outside diameter of hub (mm) | B3 | 415 | |
Flange outside diameter (mm) | B2 | 503 | |
Bolt circle diameter (mm) | G | 350 | |
Thread | G | M24 | |
Overall length (mm) | A | 532 | |
Distance between shaft ends | DBSE | 12 | |
Screw (mm) | H | M24 | |
Axial misalignment (mm) | S | 6 | |
Angular misalignment (Degree) | 2×0,35 | ||
3000 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 4000 | ||
Rated torque (kNm) | TKN | 402 | |
Fit length (mm) | C | 290 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 180-370 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 180-370 | |
Outside diameter (mm) | B1 | 639 | |
Moment of inertia at D max (10-3kgm2) | 28323 | ||
Weight at D max (kg) | 503 | ||
Tightening torque of the fastening screw (Nm) | H | 670 | |
Hub length (mm) | F | 245,5 | |
Maximum torque (Nm) | TKmax | 804 | |
Speed max. (rpm) | 990 | ||
Outside diameter of hub (mm) | B3 | 464 | |
Flange outside diameter (mm) | B2 | 553 | |
Bolt circle diameter (mm) | G | 400 | |
Thread | G | M24 | |
Overall length (mm) | A | 592 | |
Distance between shaft ends | DBSE | 12 | |
Screw (mm) | H | M24 | |
Axial misalignment (mm) | S | 6 | |
Angular misalignment (Degree) | 2×0,35 | ||
4000 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 5000 | ||
Rated torque (kNm) | TKN | 518 | |
Fit length (mm) | C | 320 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 200-400 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 200-400 | |
Outside diameter (mm) | B1 | 702 | |
Moment of inertia at D max (10-3kgm2) | 44986 | ||
Weight at D max (kg) | 670 | ||
Tightening torque of the fastening screw (Nm) | H | 1250 | |
Hub length (mm) | F | 262 | |
Maximum torque (Nm) | TKmax | 1036 | |
Speed max. (rpm) | 890 | ||
Outside diameter of hub (mm) | B3 | 490 | |
Flange outside diameter (mm) | B2 | 597 | |
Bolt circle diameter (mm) | G | 430 | |
Thread | G | M30 | |
Overall length (mm) | A | 652 | |
Distance between shaft ends | DBSE | 12 | |
Screw (mm) | H | M30 | |
Axial misalignment (mm) | S | 6 | |
Angular misalignment (Degree) | 2×0,35 | ||
5000 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 7000 | ||
Rated torque (kNm) | TKN | 693 | |
Fit length (mm) | C | 350 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 200-430 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 200-430 | |
Outside diameter (mm) | B1 | 769 | |
Moment of inertia at D max (10-3kgm2) | 71329 | ||
Weight at D max (kg) | 904 | ||
Tightening torque of the fastening screw (Nm) | H | 1250 | |
Hub length (mm) | F | 280 | |
Maximum torque (Nm) | TKmax | 1386 | |
Speed max. (rpm) | 785 | ||
Outside diameter of hub (mm) | B3 | 545 | |
Flange outside diameter (mm) | B2 | 657 | |
Bolt circle diameter (mm) | G | 490 | |
Thread | G | M30 | |
Overall length (mm) | A | 712 | |
Distance between shaft ends | DBSE | 12 | |
Screw (mm) | H | M30 | |
Axial misalignment (mm) | S | 6 | |
Angular misalignment (Degree) | 2×0,35 | ||
7000 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 8000 | ||
Rated torque (kNm) | TKN | 882 | |
Fit length (mm) | C | 380 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 230-475 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 230-475 | |
Outside diameter (mm) | B1 | 834 | |
Moment of inertia at D max (10-3kgm2) | 113616 | ||
Weight at D max (kg) | 1201 | ||
Tightening torque of the fastening screw (Nm) | H | 1250 | |
Hub length (mm) | F | 292 | |
Maximum torque (Nm) | TKmax | 1764 | |
Speed max. (rpm) | 700 | ||
Outside diameter of hub (mm) | B3 | 620 | |
Flange outside diameter (mm) | B2 | 722 | |
Bolt circle diameter (mm) | G | 560 | |
Thread | G | M24 | |
Overall length (mm) | A | 772 | |
Distance between shaft ends | DBSE | 12 | |
Screw (mm) | H | M30 | |
Axial misalignment (mm) | S | 6 | |
Angular misalignment (Degree) | 2×0,35 | ||
8000 | |||
CAD |
BZ1 Série | |
Rated torque (kNm) | TKN |
Fit length (mm) | C |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 |
Bore diameters from ø to ø H7 with interference fit | D1/2 |
Outside diameter (mm) | B1 |
Moment of inertia at D max (10-3kgm2) | |
Weight at D max (kg) | |
Tightening torque of the fastening screw (Nm) | H |
Hub length (mm) | F |
Maximum torque (Nm) | TKmax |
Speed max. (rpm) | |
Outside diameter of hub (mm) | B3 |
Flange outside diameter (mm) | B2 |
Bolt circle diameter (mm) | G |
Thread | G |
Overall length (mm) | A |
Distance between shaft ends | DBSE |
Screw (mm) | H |
Axial misalignment (mm) | S |
Angular misalignment (Degree) | |
CAD Portal |
BZ1 Serien | 10000 | ||
Rated torque (kNm) | TKN | 1040 | |
Fit length (mm) | C | 400 | |
Bore diameters from ø to ø H7 with keyways (mm) | D1/2 | 250-510 | |
Bore diameters from ø to ø H7 with interference fit | D1/2 | 250-510 | |
Outside diameter (mm) | B1 | 894 | |
Moment of inertia at D max (10-3kgm2) | 150801 | ||
Weight at D max (kg) | 1403 | ||
Tightening torque of the fastening screw (Nm) | H | 2170 | |
Hub length (mm) | F | 315 | |
Maximum torque (Nm) | TKmax | 2080 | |
Speed max. (rpm) | 645 | ||
Outside diameter of hub (mm) | B3 | 660 | |
Flange outside diameter (mm) | B2 | 763 | |
Bolt circle diameter (mm) | G | 580 | |
Thread | G | M36 | |
Overall length (mm) | A | 820 | |
Distance between shaft ends | DBSE | 20 | |
Screw (mm) | H | M36 | |
Axial misalignment (mm) | S | 10 | |
Angular misalignment (Degree) | 2×0,35 | ||
10000 | |||
CAD |
Propriedade
MATERIAL
- Coupling from high strength steel
DESIGN
- Hubs with keyway mounting or high precision cylindrical bore for interference fitting. Optional DIN 916 set screw for locking down onto shaft key.
- Properties of Crowned Gear Coupling model BZ1:
- high power density
- very low backlash
- economically priced
- low maintenance due to special crowned tooth design
- Function of the Gear Coupling:
- the precise integration of the coupling hub and intermediate flange allow for low backlash and highly rigid torque transmission, while compensating for lateral, axial, and angular shaft misalignment.
- the crowned geometry of the gearing allows for a long life, even without the presence of misalignment.
Lista