TX1 PLASTIC JAW COUPLING
Especificações TX1
| TX1 Série | |
| Elastomer coupling size | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter possible from - to H8 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Tightening torque of the clamping screw max. (Nm) | E |
| Distance (mm) | G |
| Speed standard (min-1) | |
| Maximum torque (Nm) | TKmax |
| Set screws ISO 4029 | E |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Overall length (mm) | A |
| Width elastomer insert (mm) | F |
| Static torsional stiffness (Nm/rad) | CT |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn |
| CAD Portal |
| TX1 Série | |
| Elastomer coupling size | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter possible from - to H8 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Tightening torque of the clamping screw max. (Nm) | E |
| Distance (mm) | G |
| Speed standard (min-1) | |
| Maximum torque (Nm) | TKmax |
| Set screws ISO 4029 | E |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Overall length (mm) | A |
| Width elastomer insert (mm) | F |
| Static torsional stiffness (Nm/rad) | CT |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn |
| CAD Portal |
| TX1 Serien | 10 | ||
| Elastomer coupling size | A|B|C | ||
| Rated torque (Nm) | TKN | 12,5|16|4 | |
| Fit length (mm) | C | 12 | |
| Inside diameter possible from - to H8 (mm) | D1/2 | 6-16 | |
| Inside diameter of elastomer (mm) | DE | 14,2 | |
| Outside diameter (mm) | B | 32 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 1,4 | |
| Approximate weight (kg) | 30 | ||
| Tightening torque of the clamping screw max. (Nm) | E | 0,8 | |
| Distance (mm) | G | 3,5 | |
| Speed standard (min-1) | 10000 | ||
| Maximum torque (Nm) | TKmax | 25|32|6 | |
| Set screws ISO 4029 | E | M3 | |
| Axial (mm) | max. | ±1 | |
| Lateral (mm) | max. | 0,2 | 0,17 | 0,2 | |
| Angular (degree) | max. | 1,5 | |
| Overall length (mm) | A | 35 | |
| Width elastomer insert (mm) | F | 9,5 | |
| Static torsional stiffness (Nm/rad) | CT | 260 | 600 | 90 | |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn | 541 | 1650 | 224 | |
| 10 | |||
| CAD |
| TX1 Série | |
| Elastomer coupling size | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter possible from - to H8 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Tightening torque of the clamping screw max. (Nm) | E |
| Distance (mm) | G |
| Speed standard (min-1) | |
| Maximum torque (Nm) | TKmax |
| Set screws ISO 4029 | E |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Overall length (mm) | A |
| Width elastomer insert (mm) | F |
| Static torsional stiffness (Nm/rad) | CT |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn |
| CAD Portal |
| TX1 Serien | 20 | ||
| Elastomer coupling size | A|B|C | ||
| Rated torque (Nm) | TKN | 17|21|6 | |
| Fit length (mm) | C | 25 | |
| Inside diameter possible from - to H8 (mm) | D1/2 | 10-24 | |
| Inside diameter of elastomer (mm) | DE | 19,2 | |
| Outside diameter (mm) | B | 42 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 10 | |
| Approximate weight (kg) | 80 | ||
| Tightening torque of the clamping screw max. (Nm) | E | 1,5 | |
| Distance (mm) | G | 4 | |
| Speed standard (min-1) | 9000 | ||
| Maximum torque (Nm) | TKmax | 34|42|12 | |
| Set screws ISO 4029 | E | M4 | |
| Axial (mm) | max. | ±1,5 | |
| Lateral (mm) | max. | 0,2 | 0,2 | 0,22 | |
| Angular (degree) | max. | 1,5 | |
| Overall length (mm) | A | 66 | |
| Width elastomer insert (mm) | F | 12 | |
| Static torsional stiffness (Nm/rad) | CT | 1140 | 2500 | 520 | |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn | 2540 | 4440 | 876 | |
| 20 | |||
| CAD |
| TX1 Série | |
| Elastomer coupling size | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter possible from - to H8 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Tightening torque of the clamping screw max. (Nm) | E |
| Distance (mm) | G |
| Speed standard (min-1) | |
| Maximum torque (Nm) | TKmax |
| Set screws ISO 4029 | E |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Overall length (mm) | A |
| Width elastomer insert (mm) | F |
| Static torsional stiffness (Nm/rad) | CT |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn |
| CAD Portal |
| TX1 Serien | 60 | ||
| Elastomer coupling size | A|B|C | ||
| Rated torque (Nm) | TKN | 60|75|20 | |
| Fit length (mm) | C | 30 | |
| Inside diameter possible from - to H8 (mm) | D1/2 | 16-30 | |
| Inside diameter of elastomer (mm) | DE | 27,2 | |
| Outside diameter (mm) | B | 56 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 30 | |
| Approximate weight (kg) | 180 | ||
| Tightening torque of the clamping screw max. (Nm) | E | 3 | |
| Distance (mm) | G | 6 | |
| Speed standard (min-1) | 8000 | ||
| Maximum torque (Nm) | TKmax | 120|150|35 | |
| Set screws ISO 4029 | E | M5 | |
| Axial (mm) | max. | ±1,5 | |
| Lateral (mm) | max. | 0,22 | 0,22 | 0,25 | |
| Angular (degree) | max. | 1,5 | |
| Overall length (mm) | A | 78 | |
| Width elastomer insert (mm) | F | 14 | |
| Static torsional stiffness (Nm/rad) | CT | 3290 | 9750 | 1400 | |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn | 7940 | 11900 | 1350 | |
| 60 | |||
| CAD |
| TX1 Série | |
| Elastomer coupling size | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter possible from - to H8 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Tightening torque of the clamping screw max. (Nm) | E |
| Distance (mm) | G |
| Speed standard (min-1) | |
| Maximum torque (Nm) | TKmax |
| Set screws ISO 4029 | E |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Overall length (mm) | A |
| Width elastomer insert (mm) | F |
| Static torsional stiffness (Nm/rad) | CT |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn |
| CAD Portal |
| TX1 Serien | 150 | ||
| Elastomer coupling size | A|B|C | ||
| Rated torque (Nm) | TKN | 160|200|42 | |
| Fit length (mm) | C | 35 | |
| Inside diameter possible from - to H8 (mm) | D1/2 | 19-38 | |
| Inside diameter of elastomer (mm) | DE | 30 | |
| Outside diameter (mm) | B | 66,5 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 70 | |
| Approximate weight (kg) | 270 | ||
| Tightening torque of the clamping screw max. (Nm) | E | 6 | |
| Distance (mm) | G | 7 | |
| Speed standard (min-1) | 7000 | ||
| Maximum torque (Nm) | TKmax | 320|400|85 | |
| Set screws ISO 4029 | E | M6 | |
| Axial (mm) | max. | ±2 | |
| Lateral (mm) | max. | 0,25 | 0,25 | 0,28 | |
| Angular (degree) | max. | 1,5 | |
| Overall length (mm) | A | 90 | |
| Width elastomer insert (mm) | F | 15 | |
| Static torsional stiffness (Nm/rad) | CT | 4970 | 10600 | 1130 | |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn | 13400 | 29300 | 3590 | |
| 150 | |||
| CAD |
| TX1 Série | |
| Elastomer coupling size | |
| Rated torque (Nm) | TKN |
| Fit length (mm) | C |
| Inside diameter possible from - to H8 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter (mm) | B |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Approximate weight (kg) | |
| Tightening torque of the clamping screw max. (Nm) | E |
| Distance (mm) | G |
| Speed standard (min-1) | |
| Maximum torque (Nm) | TKmax |
| Set screws ISO 4029 | E |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Overall length (mm) | A |
| Width elastomer insert (mm) | F |
| Static torsional stiffness (Nm/rad) | CT |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn |
| CAD Portal |
| TX1 Serien | 300 | ||
| Elastomer coupling size | A|B|C | ||
| Rated torque (Nm) | TKN | 325|405|84 | |
| Fit length (mm) | C | 45 | |
| Inside diameter possible from - to H8 (mm) | D1/2 | 20-45 | |
| Inside diameter of elastomer (mm) | DE | 38,2 | |
| Outside diameter (mm) | B | 82 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 180 | |
| Approximate weight (kg) | 510 | ||
| Tightening torque of the clamping screw max. (Nm) | E | 6 | |
| Distance (mm) | G | 7 | |
| Speed standard (min-1) | 6000 | ||
| Maximum torque (Nm) | TKmax | 650|810|170 | |
| Set screws ISO 4029 | E | M6 | |
| Axial (mm) | max. | ±2 | |
| Lateral (mm) | max. | 0,28 | 0,28 | 0,3 | |
| Angular (degree) | max. | 1,5 | |
| Overall length (mm) | A | 114 | |
| Width elastomer insert (mm) | F | 18 | |
| Static torsional stiffness (Nm/rad) | CT | 12400 | 18000 | 1280 | |
| Dynamic torsional stiffness (Nm/rad) | Ctdyn | 23700 | 40400 | 6090 | |
| 300 | |||
| CAD |
Propriedade
- Design: Two couplings hubs concentrically molded with concave driving jaws. Bore tolerance H7 + keyway + clamping set screw.
- Temperautre range: -20° bis +100 °C (-4° F to +212° F)
- Tolerance: On the hub/shaft connection max. 0.1 mm.
- Material:
- hubs: high strength fiber reinforced plastic
- elastomer insert: precision molded wear-restistant and thermally stable polymer
- Speeds: See below (table), higher speeds on request.
- Properties of Elastomer Coupling model TX1:
- economically priced
- low moment of inertia
- vibration damping
- electrically insulating
- corrosion resistant
- low backlash, due to keyway connection
Lista