EK6 ELASTOMER COUPLING WITH CONICAL CLAMPING RING
Especificações EK6
EK6 Série | |
Type | |
Rated torque (Nm) | TKN |
Fit length (mm) | C |
Inside diameter range H7 (mm) | D1/2 |
Inside diameter of elastomer (mm) | DE |
Outside diameter (mm) | B/B1 |
Moment of inertia per hub (10-3 kgm2) | J1/J2 |
Approximate weight (kg) | |
Fastening screw (ISO 4762) | E |
Tightening torque of the fastening screw (Nm) | E |
Distance (mm) | F |
Speed standard (min -1) | |
Speed balanced (10³min-1) | |
Maximum torque (Nm) | TKmax |
Overall length (mm) | A |
CAD Portal |
EK6 Série | |
Type | |
Rated torque (Nm) | TKN |
Fit length (mm) | C |
Inside diameter range H7 (mm) | D1/2 |
Inside diameter of elastomer (mm) | DE |
Outside diameter (mm) | B/B1 |
Moment of inertia per hub (10-3 kgm2) | J1/J2 |
Approximate weight (kg) | |
Fastening screw (ISO 4762) | E |
Tightening torque of the fastening screw (Nm) | E |
Distance (mm) | F |
Speed standard (min -1) | |
Speed balanced (10³min-1) | |
Maximum torque (Nm) | TKmax |
Overall length (mm) | A |
CAD Portal |
EK6 Serien | 4500 | ||
Type | A|B | ||
Rated torque (Nm) | TKN | 5000|6200 | |
Fit length (mm) | C | 90 | |
Inside diameter range H7 (mm) | D1/2 | 50-130 | |
Inside diameter of elastomer (mm) | DE | 113 | |
Outside diameter (mm) | B/B1 | 225/208 | |
Moment of inertia per hub (10-3 kgm2) | J1/J2 | 135,7 | |
Approximate weight (kg) | 35 | ||
Fastening screw (ISO 4762) | E | 10x M12 | |
Tightening torque of the fastening screw (Nm) | E | 100 | |
Distance (mm) | F | 66 | |
Speed standard (min -1) | 3000 | ||
Speed balanced (10³min-1) | 8|8 | ||
Maximum torque (Nm) | TKmax | 10000|12400 | |
Overall length (mm) | A | 227 | |
4500 | |||
CAD |
EK6 Série | |
Type | |
Rated torque (Nm) | TKN |
Fit length (mm) | C |
Inside diameter range H7 (mm) | D1/2 |
Inside diameter of elastomer (mm) | DE |
Outside diameter (mm) | B/B1 |
Moment of inertia per hub (10-3 kgm2) | J1/J2 |
Approximate weight (kg) | |
Fastening screw (ISO 4762) | E |
Tightening torque of the fastening screw (Nm) | E |
Distance (mm) | F |
Speed standard (min -1) | |
Speed balanced (10³min-1) | |
Maximum torque (Nm) | TKmax |
Overall length (mm) | A |
CAD Portal |
EK6 Serien | 9500 | ||
Type | A|B | ||
Rated torque (Nm) | TKN | 10000|12500 | |
Fit length (mm) | C | 112 | |
Inside diameter range H7 (mm) | D1/2 | 60-170 | |
Inside diameter of elastomer (mm) | DE | 145 | |
Outside diameter (mm) | B/B1 | 290 | |
Moment of inertia per hub (10-3 kgm2) | J1/J2 | 469,2 | |
Approximate weight (kg) | 73 | ||
Fastening screw (ISO 4762) | E | 10x M16 | |
Tightening torque of the fastening screw (Nm) | E | 160 | |
Distance (mm) | F | 80 | |
Speed standard (min -1) | 2000 | ||
Speed balanced (10³min-1) | 6,5|6,5 | ||
Maximum torque (Nm) | TKmax | 20000|25000 | |
Overall length (mm) | A | 282 | |
9500 | |||
CAD |
Propriedade
- Design: Two coupling hubs are concentrically machined with curved jaws.
- Tolerance: Overall clearance between shaft and hub 0.01 to 0.05 mm.
- Material:
- clamping hub and clamping ring: up to series 450 high strength aluminum, series 800 and up steel
- elastomer insert: precision molded, wear resistant, and thermally stable polymer
- Speeds: See table below *Please contact R+W
ISO 2.5 balance grade available - Properties of Elastomer Coupling model EK6:
- high clamping forces
- concentrically machined hubs
- vibration damping
- electrically isolating
- backlash free
- press fit design
- axial mounting possible
- Design: Two coupling hubs are concentrically machined with curved jaws.
- Tolerance: Overall clearance between shaft and hub 0.01 to 0.05 mm.
- Material:
- clamping hub and clamping ring: up to series 450 high strength aluminum, series 800 and up steel
- elastomer insert: precision molded, wear resistant, and thermally stable polymer
- Speeds: See table below *Please contact R+W
ISO 2.5 balance grade available - Properties of Elastomer Coupling model EK6:
- high clamping forces
- concentrically machined hubs
- vibration damping
- electrically isolating
- backlash free
- press fit design
- axial mounting possible
Lista