BKL MINIATURE COUPLING WITH CLAMPING HUB UP TO 3NM
Especificações BKL
BKL Série | |
Rated torque (Nm) | TKN |
Inside diameter possible from Ø to Ø H7 (mm) | D1/D2 |
Moment of inertia (gcm2) | Jges. |
Torsional stiffness (Nm/rad) | CT |
Axial (mm) | max. |
Lateral (mm) | max. |
Angular (degree) | max. |
Approximate weight (g) | |
Tightening torque of the fastening screws (Nm) | |
CAD Portal |
Propriedade
- Design:
- With a single ISO 4762 radial clamping screw per hub.
- Self opening clamp system optional: Loosening the clamping screw applies force to the pin, which will force the clamp into the open position for easy mounting and dismounting.
- Temperature range: -30° C to +100° C (-22° F to +212° F)
- Backlash: Absolutely backlash-free due to frictional clamped connection.
- Service life: These couplings have an infinite life and are maintenance-free if the technical ratings are not exceeded
- Tolerance: On the hub/shaft connection 0.01 to 0.05 mm.
- Material:
- Bellows made of highly flexible high-grade stainless steel.
- Hub material see table
- Speeds: Up to 10,000 rpm, in excess of 10,000 with a finely balanced version.
- Non-standard applications: Custom designs with varied tolerances, keyways, non-standard material, bellows and ATEX designs are available upon request.
- Properties of Bellows Coupling model BKL:
- economically priced
- low moment of inertia
- easy to mount
- Design: With a single radial clamping screw per hub ISO 4762.
- Temperature range: -40° C to +200° C (-40° F to +392° F)
- Backlash: Absolutely backlash-free.
- Material:
- Bellows are made of highly flexible high-grade stainless steel
- Hubs are made of aluminium
- Compensating of misalignment:
- Lateral misalignment up to 0,2 mm.
- Axial misalignment up to 1 mm.
- Angular misalignment up to 2° degree.
- Speeds: Up to 10,000 rpm, in excess of 10,000 rpm with balanced version.
- Properties of Miniature Coupling model BKL:
- backlash-free and torsionally rigid
- compensates for 3-axis of misalignment
- low cost
Lista