EZ2 ELASTOMER COUPLING WITH SPLIT CLAMPING HUB
Especificações EZ2
| EZ2 Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 Serien | 4500 | ||
| Type | A|B | ||
| Rated torque (Nm) | TKN | 5000|6200 | |
| Overall length (mm) | H | 181 | |
| Fit length (mm) | C | 113 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 40-120 | |
| Inside diameter of elastomer (mm) | DE | 111 | |
| Outside diameter with screw head (mm) | BS | 199 | |
| Outside diameter hub (mm) | B1 | 225 | |
| Outside diameter tube section (mm) | B2 | 175 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 140 | |
| Inertia of tube per meter (10-3 kgm2) | J3 | 750 | |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE | 168.500|371.500 | |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR | 2200000 | |
| Fastening screw (ISO 4762) | E | 8xM20 | |
| Tightening torque of the fastening screw (Nm) | E | 600 | |
| Distance between centerlines (mm) | F | 75 | |
| Distance (mm) | G/G1 | 24/41 | |
| Maximum torque (Nm) | TKmax | 10000|12400 | |
| Length (mm) | O | 84 | |
| Overall length (mm) | A | 580-4.000 | |
| Shaft average value (mm) | N | 137 | |
| 4500 | |||
| CAD |
| EZ2 Série | |
| Type | |
| Rated torque (Nm) | TKN |
| Overall length (mm) | H |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Inside diameter of elastomer (mm) | DE |
| Outside diameter with screw head (mm) | BS |
| Outside diameter hub (mm) | B1 |
| Outside diameter tube section (mm) | B2 |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 |
| Inertia of tube per meter (10-3 kgm2) | J3 |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR |
| Fastening screw (ISO 4762) | E |
| Tightening torque of the fastening screw (Nm) | E |
| Distance between centerlines (mm) | F |
| Distance (mm) | G/G1 |
| Maximum torque (Nm) | TKmax |
| Length (mm) | O |
| Overall length (mm) | A |
| Shaft average value (mm) | N |
| CAD Portal |
| EZ2 Serien | 9500 | ||
| Type | A|B | ||
| Rated torque (Nm) | TKN | 10000|12500 | |
| Overall length (mm) | H | 229 | |
| Fit length (mm) | C | 140 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 50-140 | |
| Inside diameter of elastomer (mm) | DE | 145 | |
| Outside diameter with screw head (mm) | BS | 243 | |
| Outside diameter hub (mm) | B1 | 300 | |
| Outside diameter tube section (mm) | B2 | 220 | |
| Moment of inertia per hub (10-3 kgm2) | J1/J2 | 450 | |
| Inertia of tube per meter (10-3 kgm2) | J3 | 1800 | |
| Combined dynamic torsional stiffness of the inserts (Nm/rad) | CtdynE | 590.00|670.000 | |
| Torsional stiffness of tube per meter (Nm/rad) | CTZWR | 5500000 | |
| Fastening screw (ISO 4762) | E | 8xM24 | |
| Tightening torque of the fastening screw (Nm) | E | 980 | |
| Distance between centerlines (mm) | F | 90 | |
| Distance (mm) | G/G1 | 30/48 | |
| Maximum torque (Nm) | TKmax | 20000|25000 | |
| Length (mm) | O | 105 | |
| Overall length (mm) | A | 710-4.000 | |
| Shaft average value (mm) | N | 171 | |
| 9500 | |||
| CAD |
Propriedade
- Design:
- two coupling hubs are concentrically machined with curved jaws.
- elastomer inserts are available in type A or B.
- the two coupling elements are connected with a precise and concentrically machined aluminum tube.
- Tolerance: Overall clearance between shaft and hub 0.01 to 0.05 mm.
- Material:
- clamping hub: up to series 450 high strength aluminum, series 800 and up steel
- elastomer insert: precision molded, wear resistant, and thermally stable polymer
- intermediate tube: up to series 450 precision machined aluminum tube; series 800 and up steel, composite tubes are also available
- Speeds: Please advise the application speed when ordering or inquiring about EZ Line shafts.
- Properties of Elastomer Coupling model EZ2:
- lateral mounting with split clamping hubs
- engths up to 4 meters
- no intermediate support bearing required
- low moment of inertia
- vibration damping
- press fit design
- backlash free
- Design:
- two coupling hubs are concentrically machined with curved jaws.
- elastomer inserts are available in type A or B.
- the two coupling elements are connected with a precise and concentrically machined aluminum tube.
- Tolerance: Overall clearance between shaft and hub 0.01 to 0.05 mm.
- Material:
- clamping hub: up to series 450 high strength aluminum, series 800 and up steel
- elastomer insert: precision molded, wear resistant, and thermally stable polymer
- intermediate tube: up to series 450 precision machined aluminum tube; series 800 and up steel, composite tubes are also available
- Speeds: Please advise the application speed when ordering or inquiring about EZ Line shafts.
- Properties of Elastomer Coupling model EZ2:
- lateral mounting with split clamping hubs
- engths up to 4 meters
- no intermediate support bearing required
- low moment of inertia
- vibration damping
- press fit design
- backlash free
Lista