MK6 MINIATURE BELLOWS COUPLING WITH CLAMP HUB AND EXPANDING SHAFT FROM 0,5-10 Nm
Especificações MK6
| MK6 Série | |
| Rated torque (Nm) | TKN |
| Overall length (inserted) (mm) | A+0,2 |
| Inside diameter possible from Ø to Ø H7 (mm) | D2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Fastening screw (ISO 4762) | E |
| Fastening screw (ISO 4762) | I |
| Tightening torque of the fastening screw (Nm) | E |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Mounting length (mm) | C2 |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Axial recovery force at max. preload compression (N) | |
| Fit length (mm) | C1 |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 |
| Pretensioning, approx (mm) | H |
| CAD Portal |
| MK6 Série | |
| Rated torque (Nm) | TKN |
| Overall length (inserted) (mm) | A+0,2 |
| Inside diameter possible from Ø to Ø H7 (mm) | D2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Fastening screw (ISO 4762) | E |
| Fastening screw (ISO 4762) | I |
| Tightening torque of the fastening screw (Nm) | E |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Mounting length (mm) | C2 |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Axial recovery force at max. preload compression (N) | |
| Fit length (mm) | C1 |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 |
| Pretensioning, approx (mm) | H |
| CAD Portal |
| MK6 Serien | 15 | ||
| Rated torque (Nm) | TKN | 1,5 | |
| Overall length (inserted) (mm) | A+0,2 | 27 | 32 | |
Inside diameter possible from Ø to Ø H7 (mm) | D2 | 3-8 | |
| Outside diameter (mm) | B | 19 | |
| Moment of inertia (gcm2) | Jges. | 9,0 | 10 | |
| Torsional stiffness (Nm/rad) | CT | 750 | 700 | |
| Fastening screw (ISO 4762) | E | M2,5 | |
| Fastening screw (ISO 4762) | I | M4 | |
| Tightening torque of the fastening screw (Nm) | E | 0,85 | |
| Tightening torque of the fastening screw (Nm) | I | 3 | |
| Distance between centerlines (mm) | F | 6 | |
| Distance (mm) | G | 3,5 | |
| Mounting length (mm) | C2 | 14 | |
| Lateral (mm) | max. | 0,15 | 0,2 | |
| Angular (degree) | max. | 1,5 | 1,5 | |
| Axial recovery force at max. preload compression (N) | 4 | 3 | ||
| Fit length (mm) | C1 | 12 | |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 | 10-14 | |
| Pretensioning, approx (mm) | H | 0,5 | |
| 15 | |||
| CAD |
| MK6 Série | |
| Rated torque (Nm) | TKN |
| Overall length (inserted) (mm) | A+0,2 |
| Inside diameter possible from Ø to Ø H7 (mm) | D2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Fastening screw (ISO 4762) | E |
| Fastening screw (ISO 4762) | I |
| Tightening torque of the fastening screw (Nm) | E |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Mounting length (mm) | C2 |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Axial recovery force at max. preload compression (N) | |
| Fit length (mm) | C1 |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 |
| Pretensioning, approx (mm) | H |
| CAD Portal |
| MK6 Serien | 20 | ||
| Rated torque (Nm) | TKN | 2 | |
| Overall length (inserted) (mm) | A+0,2 | 28 | 34 | 38 | |
Inside diameter possible from Ø to Ø H7 (mm) | D2 | 3-12,7 | |
| Outside diameter (mm) | B | 25 | |
| Moment of inertia (gcm2) | Jges. | 28 | 30 | 33 | |
| Torsional stiffness (Nm/rad) | CT | 1200 | 1300 | 1200 | |
| Fastening screw (ISO 4762) | E | M3 | |
| Fastening screw (ISO 4762) | I | M4 | |
| Tightening torque of the fastening screw (Nm) | E | 2,3 | |
| Tightening torque of the fastening screw (Nm) | I | 4 | |
| Distance between centerlines (mm) | F | 8 | |
| Distance (mm) | G | 4 | |
| Mounting length (mm) | C2 | 16 | |
| Lateral (mm) | max. | 0,15 | 0,2 | 0,25 | |
| Angular (degree) | max. | 1,5 | 1,5 | 2 | |
| Axial recovery force at max. preload compression (N) | 3 | 4 | 3 | ||
| Fit length (mm) | C1 | 12 | |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 | 10-16 | |
| Pretensioning, approx (mm) | H | 0,5 | |
| 20 | |||
| CAD |
| MK6 Série | |
| Rated torque (Nm) | TKN |
| Overall length (inserted) (mm) | A+0,2 |
| Inside diameter possible from Ø to Ø H7 (mm) | D2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Fastening screw (ISO 4762) | E |
| Fastening screw (ISO 4762) | I |
| Tightening torque of the fastening screw (Nm) | E |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Mounting length (mm) | C2 |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Axial recovery force at max. preload compression (N) | |
| Fit length (mm) | C1 |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 |
| Pretensioning, approx (mm) | H |
| CAD Portal |
| MK6 Serien | 45 | ||
| Rated torque (Nm) | TKN | 4,5 | |
| Overall length (inserted) (mm) | A+0,2 | 38 | 46 | |
Inside diameter possible from Ø to Ø H7 (mm) | D2 | 5-16 | |
| Outside diameter (mm) | B | 32 | |
| Moment of inertia (gcm2) | Jges. | 110 | 120 | |
| Torsional stiffness (Nm/rad) | CT | 7000 | 5000 | |
| Fastening screw (ISO 4762) | E | M4 | |
| Fastening screw (ISO 4762) | I | M5 | |
| Tightening torque of the fastening screw (Nm) | E | 4 | |
| Tightening torque of the fastening screw (Nm) | I | 6,5 | |
| Distance between centerlines (mm) | F | 10 | |
| Distance (mm) | G | 5 | |
| Mounting length (mm) | C2 | 20 | |
| Lateral (mm) | max. | 0,2 | 0,25 | |
| Angular (degree) | max. | 1,5 | 2 | |
| Axial recovery force at max. preload compression (N) | 15 | 10 | ||
| Fit length (mm) | C1 | 15 | |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 | 14-20 | |
| Pretensioning, approx (mm) | H | 0,7 | |
| 45 | |||
| CAD |
| MK6 Série | |
| Rated torque (Nm) | TKN |
| Overall length (inserted) (mm) | A+0,2 |
| Inside diameter possible from Ø to Ø H7 (mm) | D2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Fastening screw (ISO 4762) | E |
| Fastening screw (ISO 4762) | I |
| Tightening torque of the fastening screw (Nm) | E |
| Tightening torque of the fastening screw (Nm) | I |
| Distance between centerlines (mm) | F |
| Distance (mm) | G |
| Mounting length (mm) | C2 |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| Axial recovery force at max. preload compression (N) | |
| Fit length (mm) | C1 |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 |
| Pretensioning, approx (mm) | H |
| CAD Portal |
| MK6 Serien | 100 | ||
| Rated torque (Nm) | TKN | 10 | |
| Overall length (inserted) (mm) | A+0,2 | 45 | 55 | |
Inside diameter possible from Ø to Ø H7 (mm) | D2 | 5-20 | |
| Outside diameter (mm) | B | 40 | |
| Moment of inertia (gcm2) | Jges. | 220 | 230 | |
| Torsional stiffness (Nm/rad) | CT | 9050 | 8800 | |
| Fastening screw (ISO 4762) | E | M4 | |
| Fastening screw (ISO 4762) | I | M6 | |
| Tightening torque of the fastening screw (Nm) | E | 4,5 | |
| Tightening torque of the fastening screw (Nm) | I | 11 | |
| Distance between centerlines (mm) | F | 15 | |
| Distance (mm) | G | 5 | |
| Mounting length (mm) | C2 | 21,5 | |
| Lateral (mm) | max. | 0,2 | 0,3 | |
| Angular (degree) | max. | 1,5 | 2 | |
| Axial recovery force at max. preload compression (N) | 25 | 30 | ||
| Fit length (mm) | C1 | 20 | |
| Standard shaft possible from Ø to Ø f7 (mm) | D1 | 16-24 | |
| Pretensioning, approx (mm) | H | 1 | |
| 100 | |||
| CAD |
Propriedade
- Design:
- on one side an expanding shaft with tapered clamping element
- on one side a clamping hub
- backlash-free, blind mate press-fit connection (glass-fiber reinforced plastic)
- Temperature range: -30° to +110° C (-22° F to +230° F)
- Tolerance: On the hub/shaft connection 0.01 to 0.05 mm.
- Service life: These couplings have an infinite life and are maintenance-free if the technical ratings are not exceeded.
- Material:
- bellows made of highly flexible high-grade stainless steel
- clamping hub aluminium
- expanding hub and cone (steel)
- Speeds:
- up to 10,000 rpm
- over 10,000 rpm available with balanced version.
- Properties of Miniature Coupling model MK6:
- blacklash-free and torsionally rigid
- compensates for 3-axis of misalignment
- easy mounting and dismounting
- electrically insulated
- self-adjusting
- no wear
- low moment of inertia
Lista