MK1 MINIATURE SHAFT COUPLING WITH RADIAL SET SCREWS
Especificações MK1
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 1 | ||
| Rated torque (Nm) | TKN | 0,1 | |
| Overall length | A-1 | 20 | |
| Fit length (mm) | C | 5 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 1-5 | |
| Outside diameter (mm) | B | 10 | |
| Moment of inertia (gcm2) | Jges. | 0,4 | |
| Torsional stiffness (Nm/rad) | CT | 70 | |
| Tightening torque of the fastening screw (Nm) | E | 0,75 | |
| Distance (mm) | G | 1,8 | |
| Set screws ISO 4029 | E | 1x M2,5 | |
| Approximate weight (g) | 5 | ||
| Axial (mm) | max. | 0,4 | |
| Lateral (mm) | max. | 0,15 | |
| Angular (degree) | max. | 1 | |
| 1 | |||
| CAD |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 5 | ||
| Rated torque (Nm) | TKN | 0,5 | |
| Overall length | A-1 | 20 | 23 | 26 | |
| Fit length (mm) | C | 6,5 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 3-9 | |
| Outside diameter (mm) | B | 15 | |
| Moment of inertia (gcm2) | Jges. | 1,1 | 1,2 | 1,3 | |
| Torsional stiffness (Nm/rad) | CT | 280 | 210 | 170 | |
| Tightening torque of the fastening screw (Nm) | E | 1,3 | |
| Distance (mm) | G | 2 | |
| Set screws ISO 4029 | E | 1x M3 | |
| Approximate weight (g) | 6 | 6 | 6 | ||
| Axial (mm) | max. | 0,4 | 0,5 | 0,6 | |
| Lateral (mm) | max. | 0,15 | 0,2 | 0,25 | |
| Angular (degree) | max. | 1 | 1,5 | 2 | |
| 5 | |||
| CAD |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 10 | ||
| Rated torque (Nm) | TKN | 1 | |
| Overall length | A-1 | 22 | 25 | 28 | |
| Fit length (mm) | C | 6,5 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 3-9 | |
| Outside diameter (mm) | B | 15 | |
| Moment of inertia (gcm2) | Jges. | 1,3 | 1,8 | 2 | |
| Torsional stiffness (Nm/rad) | CT | 510 | 380 | 320 | |
| Tightening torque of the fastening screw (Nm) | E | 1,3 | |
| Distance (mm) | G | 2 | |
| Set screws ISO 4029 | E | 1x M3 | |
| Approximate weight (g) | 6 | 7 | 8 | ||
| Axial (mm) | max. | 0,4 | 0,5 | 0,6 | |
| Lateral (mm) | max. | 0,15 | 0,2 | 0,25 | |
| Angular (degree) | max. | 1 | 1,5 | 2 | |
| 10 | |||
| CAD |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 15 | ||
| Rated torque (Nm) | TKN | 1,5 | |
| Overall length | A-1 | 24 | 29 | |
| Fit length (mm) | C | 7,5 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 3-12 | |
| Outside diameter (mm) | B | 19 | |
| Moment of inertia (gcm2) | Jges. | 4,7 | 5,5 | |
| Torsional stiffness (Nm/rad) | CT | 750 | 700 | |
| Tightening torque of the fastening screw (Nm) | E | 1,3 | |
| Distance (mm) | G | 2 | |
| Set screws ISO 4029 | E | 2x M3 | |
| Approximate weight (g) | 12 | 14 | ||
| Axial (mm) | max. | 0,5 | 0,7 | |
| Lateral (mm) | max. | 0,15 | 0,2 | |
| Angular (degree) | max. | 1,5 | 1,5 | |
| 15 | |||
| CAD |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 20 | ||
| Rated torque (Nm) | TKN | 2 | |
| Overall length | A-1 | 26 | 31 | 35 | |
| Fit length (mm) | C | 11 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 3-16 | |
| Outside diameter (mm) | B | 25 | |
| Moment of inertia (gcm2) | Jges. | 15 | 18 | 20 | |
| Torsional stiffness (Nm/rad) | CT | 1200 | 1300 | 1200 | |
| Tightening torque of the fastening screw (Nm) | E | 2,5 | |
| Distance (mm) | G | 2,5 | |
| Set screws ISO 4029 | E | 2x M4 | |
| Approximate weight (g) | 22 | 24 | 26 | ||
| Axial (mm) | max. | 0,5 | 0,6 | 0,7 | |
| Lateral (mm) | max. | 0,15 | 0,2 | 0,25 | |
| Angular (degree) | max. | 1,5 | 1,5 | 2 | |
| 20 | |||
| CAD |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 45 | ||
| Rated torque (Nm) | TKN | 4,5 | |
| Overall length | A-1 | 37 | 45 | |
| Fit length (mm) | C | 13 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 6-22 | |
| Outside diameter (mm) | B | 32 | |
| Moment of inertia (gcm2) | Jges. | 65 | 70 | |
| Torsional stiffness (Nm/rad) | CT | 7000 | 5000 | |
| Tightening torque of the fastening screw (Nm) | E | 4 | |
| Distance (mm) | G | 3,5 | |
| Set screws ISO 4029 | E | 2x M5 | |
| Approximate weight (g) | 54 | 58 | ||
| Axial (mm) | max. | 0,7 | 1 | |
| Lateral (mm) | max. | 0,2 | 0,25 | |
| Angular (degree) | max. | 1,5 | 2 | |
| 45 | |||
| CAD |
| MK1 Série | |
| Rated torque (Nm) | TKN |
| Overall length | A-1 |
| Fit length (mm) | C |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 |
| Outside diameter (mm) | B |
| Moment of inertia (gcm2) | Jges. |
| Torsional stiffness (Nm/rad) | CT |
| Tightening torque of the fastening screw (Nm) | E |
| Distance (mm) | G |
| Set screws ISO 4029 | E |
| Approximate weight (g) | |
| Axial (mm) | max. |
| Lateral (mm) | max. |
| Angular (degree) | max. |
| CAD Portal |
| MK1 Serien | 100 | ||
| Rated torque (Nm) | TKN | 10 | |
| Overall length | A-1 | 43 | 53 | |
| Fit length (mm) | C | 15 | |
Inside diameter possible from Ø to Ø H7 (mm) | D1/2 | 6-28 | |
| Outside diameter (mm) | B | 40 | |
| Moment of inertia (gcm2) | Jges. | 180 | 220 | |
| Torsional stiffness (Nm/rad) | CT | 9050 | 8800 | |
| Tightening torque of the fastening screw (Nm) | E | 6 | |
| Distance (mm) | G | 4 | |
| Set screws ISO 4029 | E | 2x M6 | |
| Approximate weight (g) | 106 | 114 | ||
| Axial (mm) | max. | 1 | 1,2 | |
| Lateral (mm) | max. | 0,2 | 0,3 | |
| Angular (degree) | max. | 1,5 | 2 | |
| 100 | |||
| CAD |
Propriedade
- Design: Hubs with DIN 916 radial set screw and integral dismounting groove.
- Tempretaure range: -30° C to +110° C (-22° F to +230° F)
- Tolerance: On the hub/shaft connection 0.01 to 0.08 mm.
- Service life: These couplings have an infinite service life, and are maintenance free, if the technical ratings are not exceeded.
- Material:
- bellows are made of higly flexible high-grade stainless steel, bellow of the serie 0.5 is Tombac
- hubs from aluminium
- Speeds: Up to 20,000 rpm, in excess of 20,000 rpm available with balanced version.
- Non-standard application: Custom designs with varied tolerances, keyways, non-standard material and bellows are available upon request.
- Properties of Miniature Coupling model MK1:
- backlash-free and torsionally rigid
- compensates for 3-axis of misalignment
- a mounting groove or flattening of the shaft is not required due to the integrated dismounting groove
- low-cost design
- low moment of inertia
Lista